How to Make a Coca-Cola and Sprite Fountain Machine
Making a Coca-Cola and Sprite fountain machine at home is a fun and creative project! I have provided step-by-step instructions on how you can make it using readily available materials. I have provided links to the sales of the materials.
Materials Needed
- Cardboard: https://amzn.to/3Zki6BG
- Plastic drink bottle (2-liter bottle works well).
- Silicone pipe: https://amzn.to/4i07rDs
- DC air pump: https://amzn.to/3VwJTwT
- Push-button switch: https://amzn.to/3wZAKUi
- Electric wire: https://amzn.to/45hRMJU
- Hot glue gun: https://amzn.to/3xiRANP
- Servo motor: https://amzn.to/3Vi3Cim
- Battery: https://amzn.to/3Rjvd1P
Buy Materials: Amazon Stores for All Materials
Coca-Cola and Sprite Fountain Machine at Home
Instructions
1. Cardboard set for Coca-Cola and Sprite Fountain Machine
- Cut the cardboard to size. Once you have all the parts, move on to the next step.
Coca-Cola and Sprite Fountain Machine at Home
2. Set up the bottles
- Clean and dry the bottles thoroughly.
- Drill small holes in the bottle caps to allow the silicone tubing to fit snugly.
- Glue the caps tightly.
Coca-Cola and Sprite Fountain Machine at Home
3. Attach the tubing
- Insert one end of the tubing into the hole drilled in the bottle cap.
- Make sure the tubing reaches close to the bottom of the bottle to allow the liquid to drain completely.
4. Connect to the pump Coca-Cola and Sprite Fountain Machine
- Attach the other end of the tubing to the outlet of the water pump.
5. Set up the base
- Place the bottles on the cardboard. Make sure they are secure.
- Place the pumps under the bottles, as gravity will help the liquid flow into the tubes.
6. Install the distribution system
- Connect the electrical to the pump for Coca-Cola and Sprite Fountain Machine
- Connect the switch.
7. Pump power
- Connect the pumps to the batteries
Coca-Cola and Sprite Fountain Machine at Home
8. Test and adjust
- Fill the bottles with Coca-Cola and Sprite.
- Turn on the pump and test the flow.
9. For payment
- Attach servo motor
- Place a gap between two aluminum steels through a box. Attach wire to the steel.
Important Tips
- Check all components thoroughly before use.
This Coca-Cola and Sprite Fountain Machine is a great conversation starter and a fun way to creatively serve drinks!